2017 Gehl V270 GEN2 SKID LOADER
Call for Price
2017 GEHL V270 GEN2 SKID LOADER (1)
The V270 GEN:2 Skid Loader is a product of superior innovation and well thought-out product development.
* Emissions certified Tier IV engines combine power and efficiency.
* Self leveling lift action for better control of lifting loads.
* The chassis aids in superior weight distribution, which further enhances stability.
* Thick steel plating and heavy-duty pins and bushings make this loader stronger than any other machine in its class.
* A heavily constructed vertical-lift boom provides substantial forward reach at trailer loading and dumping heights.
* Electronic engine control and foot throttle allow operation at part throttle, reducing sound levels and fuel consumption.
The spacious operator’s compartment on the V270 GEN:2 Skid Loader is every operator’s dream.
* Level II FOPS is standard equipment.
* Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide cleaner and quieter operating environment.
* Extra-large side screens combined with a low-profile?lift arm design provide a wide field-of-view to the side work areas.
* Fully adjustable controls and an optional air-ride seat deliver outstanding comfort.
* Domed, wide-view glass door option reduces glare and provides optimal visibility to the lift arm, work tool and front work area. Large top, front window provides a clear view of the lift arm in its higher lift positions.
The Gehl V270 GEN:2 Skid Loader is ergonomically designed to reduce operator fatigue and increase productivity.
* T-Bar and dual-hand controls now available.
* Optional electronic attachment control - 14-pin connector for easy operation of all attachments.
* Adjustable joystick handles provide for ease of operator control with minimal of effort, to reduce fatigue.
* New upper-left and upper-right instrument panels provide easy readout and switch access.
* Pilot joystick controls or pilot hand/foot controls provide the ultimate in operator comfort, ease and controllability.
* Infinitely adjustable proportional auxiliary hydraulics.
* Hydraloc™ system applies brakes whenever the operator raises restraint bar, leaves the operator’s seat or switches off the ignition.
Emissions certified Tier IV engines combine power and efficiency on the V270 GEN:2 model.
* Engine consumes less fuel, making a positive impact on the bottom line.
* Automatic glow module engine intake heating system provides superior cold-weather starting.
* Engine has conventional water/ethylene glycol liquid-cooled design.
* Engine warranty, parts and service are handled through normal dealership servicing in conjunction with Gehl parts and service support.
Model 4TNV98CT-NMS Tier IV
Net Power (kW) @ rpm 70.7 hp (52.7) @ 2500
Maximum Torque (Nm) 217 ft.-lbs. (294) @ 1625
Travel Speed - Max with 2-Speed Option (km/hr) 11.9 mph (19.2)
When maximum hydraulic power is needed to run demanding attachments, the V270 GEN:2 Skid Loader is equipped with the tools to get the job done right.
* Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
* Standard auxiliary detent allows the operator to set attachment for continuous operation.
* Hydraglide™ system allows the lift arm to “float" when transporting loads, minimizing loss of material at faster transport speeds.
* Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
* Pilot-controlled hydrostatic transmission with direct engine coupling provides high operating efficiency.
Auxiliary Hydraulics - Standard (L/min) 23.5 gpm (89)
High-Flow Hydraulics - Optional (L/min) 35 gpm (132)
System Relief Pressure (bar) 3,200 psi (220.6)
Reservoir Capacity (L) 10.5 gal. (40)
A full line of Edge attachments and accessories are designed specifically to fill operators’ needs, making their V270 GEN:2 the most versatile machine on the job site. Popular attachments are listed below.
B Bale Movers
D Pallet Forks
F Silage Defacer
G Stump Removal Bucket
Full Line of Edge Attachments for V270 GEN:2
The V270 GEN:2 Skid Loader does not use the ordinary vertical-lift design. This loader’s lift arm is designed with the operator in mind.
* Low-profile lift arm design provides outstanding forward and side visibility.
* Self-leveling lift action provides better control of lifting loads.
* Heavy-duty timing link design, upper-rear channel support and large diameter pivot pins provide extra strength and rigidity to the lift arm, and exceptional rear visibility.
* Four-point support through dual bucket cylinders and two lift arm stop blocks on the front of the main frame evenly distribute digging forces.
Height to Hinge Pin - Fully Raised (mm) 130" (3310)
Dump Reach at Full Height (mm) 32" (813)
As with any Gehl loader, serviceability on the V270 GEN:2 Skid Loader is a snap.
* Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
* Featured cab safety restraint bar for lifting ROPS/FOPS.
* Large rear door easily opens on hinges on right side, allowing full access for servicing and maintenance.
* Remote engine oil filter is on left side; easy access to hydraulic oil filter on right side.
* Entire ROPS/FOPS assembly tilts rearward with a hydraulic lift for easy internal service access.
* Drive chains and axle bearings are sealed systems that require no maintenance.
* Coded wiring takes the guesswork out of electrical system identification.
- Overall Operating Height - Fully Raised: 167.4"
- Height to Hinge Pin - Fully Raised: 130.3"
- Overall Height to Top of ROPS: 81"
- Ground Clearance to Chassis: 8.0"
- Overall Length with Bucket: 148"
- Overall Length without Bucket: 116.5"
- Wheelbase: 49.5"
- Dump Reach - Fully Raised: 32"
- Rollback at Ground: 29°
- Dump Angle: 42°
- Overall Width: 69.5"
- Bucket Width: 70"
- Clearance Circle - Rear: 65.5"
- Clearance Circle - Front without Bucket: 56"
- Clearance Circle - Front with Bucket: 90"
- Seat to Ground Height: 40"
- Rollback at Specified Height: 94°
- Dump Height: 100"
- Departure Angle: 25°
- Standard Specification Tire Size: 12.00 - 16.5 HD
- Make: Yanmar
- Model: 4TNV98CT-NMS Tier IV
- Net Power @ rpm: 70.7 hp @ 2500
- Gross Power @ rpm: 72 hp @ 2500
- Displacement: 202.6 cu.in.
- Maximum Torque: 217 ft.-lbs. @ 1625
- Auxiliary Hydraulics - Standard: 23.5 gpm
- High-Flow Auxiliary Hydraulics - Option: 35 gpm
- System Relief Pressure: 3,200 psi
- Reservoir Capacity: 10.5 gal.
- Rated Operating CapacityA: 2,700 lbs.
- Fuel Tank: 24.5 gal.
- Travel Speed - Maximum: 7.4 mph
- Travel Speed with Two-Speed OptionB - Maximum: 11.9 mph
- Operating WeightC - Approximate: 8,150 lbs.
- Gehl T-Bar Controls: Optional
- Hand/Foot Controls: Optional
- Joystick Controls: Optional
- Dual-Hand Controls: Optional
- Engine Auto-Shutdown System: Standard
- Engine Pre Heater: Standard
- Turbo-charged Engine: Standard
- Auxiliary Hydraulics: Standard
- High-Flow Auxiliary Hydraulics: Optional
- Adjustable Arm Rests/Control Towers: Standard
- Air-Conditioning: Optional
- High Back Adjustable Seat: Standard
- Suspension Seat - Air Ride: Optional
- Cab Enclosure: Optional
- Suspension Seat - Mechanical: Optional
- Foot and Hand Throttles: Standard
- Full Instrumentation: Standard
- Horn: Standard
- Heating: Optional
- Operator Restraint Bar: Standard
- Integral Access Plate (Removable): Standard
- ROPS/FOPS Level II Overhead Guard: Standard
- Suspension Seat - Mechanical: Standard
- Sound Reduction Material: Standard
- Work Lights - Front and Rear: Standard
- Power-A-Tach® Attachment Mounting System: Optional
- All-Tach® Attachment Mounting System: Standard
- Anti-Vandalism Protection: Standard
- Electronic Attachment Control - 14-Pin Connector: Optional
- Back-Up Alarm: Optional
- Counterweight: Optional
- Brake Control (Auto/Manual)/td>: Standard
- Hydraglide™ Ride Control: Standard
- Hydraloc™ Safety System: Standard
- Hydrostatic Drive - Servo: Standard
- Lift Arm Support Device: Standard
- Self-Leveling Lift Action: Optional
- Two-Speed Drive: Optional
- Engine Type
- 4TNV98CT-NMS Tier IV
- Engine Manufacturer
- Fuel Capacity
- 24.5 gal.
- Max Ground Speed
- 7.4 mph